Designed for dual level, loaded board testing.
Mounting holes in AT7000, G10/FR4 or similar materials should be gauged at 0.0380/0.0390 [0.965/0.991] using a PG050-25 pin gauge.
Order the ATR050 or ATR050M (metric) adjustable tool for mounting sockets at varying set heights.
A replaceable drive pin ATR050-PIN or stop tube ATR050-STOP can be ordered when your used tool is damaged or worn. Either type is used for inches or metric. Set height range: 0.000 to 0.270 [0.00 to 6.86].
Order the ITR050-FL or ITR050 SET .XXX. Specify height: 0.000 to 0.270 [0.00 to 6.86] to install 050-R40 series sockets.
A replaceable tip, ITR050-FL-TIP or ITR050-TIP Specify height: 0.000 to 0.270 [0.00 to 6.86], can be ordered when your used tool is damaged or worn.
The ETR050-25-KIT for removing a damaged socket from its mounting hole. The kit comprises of one ETR050-25 socket extraction tool and one ITR050-FL (Sockets must be flush before extraction).
The ETR050-25 socket extraction tool is also available separately. A replaceable tip, ETR050-25-TIP, can be ordered when your used tool is damaged or worn.
Use the PT50/39 to install 050-25 series probes.
PERX39/050 tools allow easy removal of probes with headed tip styles.
A replaceable tip, PERX39/050-TIP, can be ordered when your used tool is damaged or worn.
TERX39/050 tools are used to remove damaged probe tubes. A replaceable tip, TERX39/050-TIP, can be ordered when your used tool is damaged or worn.
GTR50 tools are used to install wire grips for the wire assembly into the back of the socket. A replaceable tip, GTR50-TIP, can be ordered when your used tool is damaged or worn.
WTR28 or WTR30 tools are used to install wire plugs into the back of the socket. A replacement tip, WTR28-TIP or WTR30-TIP, can be ordered when your used tool is damaged or worn.
Order the JTR2830 to install wire jacks into the back of the socket.
A replaceable tip, JTR2830-TIP, can be ordered when your used tool is damaged or worn.
Use IP050-R4040 to measure probe stroke in a test fixture (Plunger remains at deflected position).
WS tool has a selectable built-in adjustment dial to accommodate various wire sizes from 26-36 AWG. They are preset to strip a length of 0.120 [3.05] for use with wire plugs, jacks or grips.
WS-UNSET tool has a selectable built-in adjustment dial to accommodate various wire sizes from 26-36 AWG. The WS-UNSET tool has a movable gage that can produce a strip length up to 2 [50].
Our WW26, WW28 and WW30 high quality hand wire wrap tools that are available for 26, 28, or 30 AWG wire sizes. These tools form modified wraps on standard 0.025 [0.635] square or round posts up to 0.750 [19.05] long.
Additionally, WW26P, WW28P and WW30P can wrap pins up to 1.125 [28.58] long.
Our WU unwrap tools are double ended to facilitate easy removal of both clockwise and counterclockwise wraps and are compatible with both the standard and long pin versions.
For insulating wire wrap and wire jack sockets and termination pins on 0.050 [1.27] centers and smaller.
Available in blue 24 [610] lengths with a 0.046 [1.17] ID, this tubing is stiffer than other types, making installation easier. Customer to cut tubing in lengths to suit application.
TBR-1 is a made from an ESD anti-static natural bristle to easily clean away fluxes and debris from your test probe tips as part of your regularly scheduled maintenance program.
QA's THM-1 hammer is used in conjunction with our installation and extraction tools.
TRL-1 is a sturdy, compact canvas tool roll that organizes a variety of maintenance tools and make them accessible at your fingertips. (Tools are sold separately.)
All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm/newtons].