Wireless Termination Pins

Wireless termination pins allow construction of X Probe Socketless fixtures with far shorter signal path lengths than conventional wire wrap designs. The shorter path length allows better control of the signal from the tester circuits to the Unit Under Test (UUT). Note: Top test probe is not included and should be ordered separately.

Suggested Mounting Holes and Drill Sizes in AT7000, G10/FR4 or similar material should be gauged at:

Plates	Hole Size	Drill Size
Probe Plate	0.0545/0.0560 [1.384/1.422]	#54 or 1.40mm
Back Plate	0.0380/0.0390 [0.965/0.990]	#61 or 1.00mm

0 - Round

3 - Chisel

TIP STYLE

Digits	Description
0	Round. Heat treated BeCu/gold plated over nickel.
3	Chisel. Heat treated BeCu/gold plated over nickel.

BODY SELECTION

Material	Order your P/N
Tube & Termination: Heat treated BeCu/gold plated over nickel. Chisel Tip
Tube: Nickel Silver/ID Precious Metal Clad. Termination: Heat treated BeCu/gold plated over nickel. Chisel Tip
Tube: Nickel Silver/ID Precious Metal Clad. Termination: Heat treated BeCu/gold plated over nickel. Round Tip
Tube: Nickel Silver/ID Precious Metal Clad. Termination: Heat treated BeCu/gold plated over nickel. Chisel Tip
Tube: Nickel Silver/ID Precious Metal Clad. Termination: Heat treated BeCu/gold plated over nickel. Round Tip

SPRING FORCE

Part Number	Preload	@Working Stroke	Material	Cycle Life @ Stroke
XTDS3-00	1.0 [28g/0.28N]	4.5 [128g/1.25N]	SS	10,000 @ 0.075 [1.91]
XTDS3-08 or XTDS0-08	0.8 [23g/0.23N]	3.8 [108g/1.04N]	SS	100,000 @ 0.100 [2.54]
XTDS3-14 or XTDS0-14	0.8 [23g/0.23N]	3.8 [108g/1.04N]	SS	100,000 @ 0.100 [2.54]

All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm/newtons]. US Patent No. 6,570,399 & 4,885,533.