X31-40 Series | 0.031 [0.800] Centers | 0.400 [10.16] Full Stroke

Mounting holes in AT7000, G10/FR4 or similar materials for the Probe should be gauged at 0.0250/0.0260 [0.635/0.660] using PG-X31-P. Back Plate should be gauged at 0.0217/0.0225 [0.551/0.572] using PG-X31-T.

To install X31-40 termination pins, order the ITRX31-FL

Specify Height (positive or negative):

ITRX31 SET .XXX : -0.150 to 0.100 [-3.81 to 2.54]

ITRX31E-SET .XXX : -0.435 to -0.150 [-11.05 to -3.81]

A replacement -TIP can be ordered when your used tool is damaged or worn.

The ETRX31 for removing a damaged termination from its mounting hole when the Probe and optional Spacer Plates are removed.

Order the ETRX31E when the Probe and optional Spacer Plates are installed.

To properly extract a termination from your fixture, we recommend that it first be mounted Flush. For your convenience, we offer an ETRX31-KIT which includes one ETRX31 and one ITRX31-FL.

A replacement -TIP can be ordered when your used tool is damaged or worn.

Use the PT50/39 to install X31 series probes.

The TERX31/039 for removing damaged probe tubes without damaging the fixture.

A replacement -TIP can be ordered when your used tool is damaged or worn.

Order the GTR31 to install the WG31 Wire Grip sleeve.

A replacement -TIP can be ordered when your used tool is damaged or worn.

WS tool has a selectable built-in adjustment dial to accommodate various wire sizes from 26-36 AWG. They are preset to strip a length of 0.120 [3.05] for use with wire plugs, jacks or grips.

WS-UNSET tool has a selectable built-in adjustment dial to accommodate various wire sizes from 26-36 AWG. The WS-UNSET tool has a movable gage that can produce a strip length up to 2 [50].

For insulating wire wrap and wire jack sockets and termination pins on 0.050 [1.27] centers and smaller.

Available in blue 24 [610] lengths with a 0.046 [1.17] ID, this tubing is stiffer than other types, making installation easier. Customer to cut tubing in lengths to suit application.

TBR-1 is a made from an ESD anti-static natural bristle to easily clean away fluxes and debris from your test probe tips as part of your regularly scheduled maintenance program.

THM-1 Hammer is to be used in conjunction with our installation and extraction tools.

TRL-1 is a sturdy, compact canvas tool roll to organize a variety of maintenance tools to be accessible at your fintertips. (tools are sold separately)