X39-16 Series | 0.039 [1.00] Centers | 0.160 [4.06] Full Stroke

Mounting holes in AT7000, G10/FR4 or similar materials for the Probe Plate and Back Plate (wired and wireless) should be gauged at 0.0315/0.0325 [0.800/0.826] using PG-X39 pin gauge.

To install X39-16 termination pins, order the ITRX39-FL

Specify Height (positive or negative):

ITRX39 SET .XXX : -0.150 to 0.100 [-3.81 to 2.54]

ITRX39E SET .XXX : -0.435 to -0.150 [-11.05 to -3.81]

A replacement -TIP can be ordered when your used tool is damaged or worn.

The ETRX39 for removing a damaged termination from its mounting hole when the Probe Plate is removed.

Order the ETRX39E when the Probe Plate is installed.

To properly extract a termination from your fixture, we recommend that it first be mounted Flush. For your convenience, we offer an ETRX39-KIT which includes one ETRX39 and one ITRX39-FL.

A replacement -TIP, can be ordered when your used tool is damaged or worn.

Use the PT50/39 to install X39-16 series probes.

The TERX39/050 is for removing damaged probe tubes without damaging the fixture.

A replacement -TIP can be ordered when your used tool is damaged or worn.

Order the JTR2830 tool to install the wire jacks onto the termination pin.

A replacement -TIP can be ordered when your used tool is damaged or worn.

WS tool has a selectable built-in adjustment dial to accommodate various wire sizes from 26-36 AWG. They are preset to strip a length of 0.120 [3.05] for use with wire plugs, jacks or grips.

WS-UNSET tool has a selectable built-in adjustment dial to accommodate various wire sizes from 26-36 AWG. The WS-UNSET tool has a movable gage that can produce a strip length up to 2 [50].

Order the CR2830, an air actuated Wire Crimper Tool, to permanently attach customer supplied wire to Wire Jacks.

For insulating wire wrap and wire jack sockets and termination pins on 0.050 [1.27] centers and smaller.

Available in blue 24 [610] lengths with a 0.046 [1.17] ID, this tubing is stiffer than other types, making installation easier. Customer to cut tubing in lengths to suit application.

TBR-1 is a made from an ESD anti-static natural bristle to easily clean away fluxes and debris from your test probe tips as part of your regularly scheduled maintenance program.

THM-1 Hammer is to be used in conjunction with our installation and extraction tools.

TRL-1 is a sturdy, compact canvas tool roll to organize a variety of maintenance tools to be accessible at your fintertips. (tools are sold separately)