X39-25 Series | 0.039 [1.00] Centers | 0.250 [6.35] Full Stroke

Mounting holes in AT7000, G10/FR4 or similar materials for the Probe Plate and Back Plate (wired and wireless) should be gauged at 0.0315/0.0325 [0.800/0.826] using PG-X39 pin gauge.

To install X39-25 termination pins, order the ITRX39-FL

Specify Height (positive or negative):

ITRX39 SET .XXX : -0.150 to 0.100 [-3.81 to 2.54]

ITRX39E SET .XXX : -0.435 to -0.150 [-11.05 to -3.81]

A replacement -TIP can be ordered when your used tool is damaged or worn.

The ETRX39 for removing a damaged termination from its mounting hole when the Probe & Spacer Plates are removed.

Order the ETRX39E when the Probe & Spacer Plates are installed.

To properly extract a termination from your fixture, we recommend that it first be mounted Flush. For your convenience, we offer an ETRX39-KIT which includes one ETRX39 and one ITRX39-FL.

A replacement -TIP, can be ordered when your used tool is damaged or worn.

Use the PT50/39 to install X39-25 series probes.

PERX39/050 tools allow easy removal of probes with headed tip styles.

A replacement -TIP can be ordered when your used tool is damaged or worn.

The TERX39/050 for removing damaged probe tubes without damaging the fixture.

A replacement -TIP can be ordered when your used tool is damaged or worn.

Order the GTR50 tool to install wire grip sleeve onto the termination pin.

A replacement -TIP can be ordered when your used tool is damaged or worn.

Order the JTR2830 tool to install the wire jacks onto the termination pin.

A replacement -TIP can be ordered when your used tool is damaged or worn.

Use IPX39-2540 to measure probe stroke in a test fixture (plunger remains at deflected position).

Order the CR2830, an air actuated Wire Crimper Tool, to permanently attach customer supplied wire to Wire Jacks.

WS tool has a selectable built-in adjustment dial to accommodate various wire sizes from 26-36 AWG. They are preset to strip a length of 0.120 [3.05] for use with wire plugs, jacks or grips.

WS-UNSET tool has a selectable built-in adjustment dial to accommodate various wire sizes from 26-36 AWG. The WS-UNSET tool has a movable gage that can produce a strip length up to 2 [50].

For insulating wire wrap and wire jack sockets and termination pins on 0.050 [1.27] centers and smaller.

Available in blue 24 [610] lengths with a 0.046 [1.17] ID, this tubing is stiffer than other types, making installation easier. Customer to cut tubing in lengths to suit application.

TBR-1 is a made from an ESD anti-static natural bristle to easily clean away fluxes and debris from your test probe tips as part of your regularly scheduled maintenance program.

THM-1 Hammer is to be used in conjunction with our installation and extraction tools.

TRL-1 is a sturdy, compact canvas tool roll to organize a variety of maintenance tools to be accessible at your fintertips. (tools are sold separately)