X50-40 Series | 0.050 [1.27] Centers | 0.400 [10.16] Full Stroke

Mounting holes in AT7000, G10/FR4 or similar materials for the Probe Plate should be gauged at 0.0415/0.0430 [1.054/1.092] using PG-X50-P pin gauge.

For Back Plate (wired and wireless) should be gauged at 0.0380/0.0390 [0.965/0.990] using PG-X50-T pin gauge.

To install X50-16 termination pins, order the ITRX50-FL

Specify Height (positive or negative):

ITRX50 SET .XXX : -0.150 to 0.140 [-3.81 to 3.56]

ITRX50E SET .XXX : -0.435 to -0.150 [-11.05 to -3.81]

A replacement-TIP can be ordered when your used tool is damaged or worn.

The ETRX50 for removing a damaged termination from its mounting hole when the Probe & Plates are removed.

Order the ETRX50E when the Probe & Spacer Plates are installed.

To properly extract a termination from your fixture, we recommend that it first be mounted Flush. For your convenience, we offer an ETRX50-KIT which includes one ETRX50 and one ITRX50-FL.

A replacement -TIP can be ordered when your used tool is damaged or worn.

Use the PT50/39 to install X50-40 series probes.

PERX50/075 tools allow easy removal of probes with headed tip styles.

A replacemernt -TIP can be ordered when your used tool is damaged or worn.

The TERX50/075 for removing damaged probe tubes without damaging the fixture.

A replacemernt -TIP can be ordered when your used tool is damaged or worn.

Use the GTR50 Wire Grip Installation Tools to install wire grip sleeve into socket.

A replacement -TIP can be ordered when your used tool is damaged or worn.

Order the JTR2830 to install the wire jacks.

A replacement -TIP can be ordered when your used tool is damaged or worn.

Use IPX50-4040 to measure probe stroke in a test fixture (plunger remains at deflected position).

Order the CR2830, an air actuated Wire Crimper Tool, to permanently attach customer supplied wire to Wire Jacks.

WS tool has a selectable built-in adjustment dial to accommodate various wire sizes from 26-36 AWG. They are preset to strip a length of 0.120 [3.05] for use with wire plugs, jacks or grips.

WS-UNSET tool has a selectable built-in adjustment dial to accommodate various wire sizes from 26-36 AWG. The WS-UNSET tool has a movable gage that can produce a strip length up to 2 [50].

Our WW26, WW28 and WW30 high quality hand wire wrap tools that are available for 26, 28, or 30 AWG wire sizes. These tools form modified wraps on standard 0.025 [0.635] square or round posts up to 0.750 [19.05] long.

Additionally, WW26P, WW28P and WW30P can wrap pins up to 1.125 [28.58] long.

Our WU unwrap tools are double ended to facilitate easy removal of both clockwise and counterclockwise wraps and are compatible with both the standard and long pin versions.

For insulating wire wrap and wire jack sockets and termination pins on 0.050 [1.27] centers and smaller.

Available in blue 24 [610] lengths with a 0.046 [1.17] ID, this tubing is stiffer than other types, making installation easier. Customer to cut tubing in lengths to suit application.

TBR-1 is a made from an ESD anti-static natural bristle to easily clean away fluxes and debris from your test probe tips as part of your regularly scheduled maintenance program.

THM-1 Hammer is to be used in conjunction with our installation and extraction tools.

TRL-1 is a sturdy, compact canvas tool roll to organize a variety of maintenance tools to be accessible at your fintertips. (tools are sold separately)