X75-40 Series | 0.075 [1.91] Centers | 0.400 [10.16] Full Stroke

Mounting holes in AT7000, G10/FR4 or similar materials for the Probe Plate should be gauged at 0.0545/0.0560 [1.384/1.422] using PG-X75A-P pin gauge.

For the Back Plate (wired) should be gauged at 0.0515/0.0525 [1.308/1.333] using PG-X75A-T pin gauge.

For the Back Plate (wireless) should be gauged at 0.0380/0.0390 [0.965/0.990] using PG-X50T pin gauge.

To install X75-16 termination pins, order the ITRX75-FL or

Specify Height (positive or negative):

ITRX75 SET .XXX : -0.150 to 0.140 [-3.81 to 3.56]

ITRX75E SET .XXX : -0.435 to -0.150 [-11.05 to -3.81]

A replacement -TIP can be ordered when your used tool is damaged or worn.

The ETRX75 for removing a damaged termination from its mounting hole when the Probe & Spacer Plates are removed.

Order the ETRX75E when the Probe & Spacer Plates are installed.

To properly extract a termination from your fixture, we recommend that it first be mounted Flush. For your convenience, we offer an ETRX75-KIT which includes one ETRX75 and one ITRX75-FL.

A replacement -TIP can be ordered when your used tool is damaged or worn.

Use the PT100/75 to install X75-40 series probes.

PERX75/100 tools allow easy removal of probes with headed tip styles.

A replacement -TIP can be ordered when your used tool is damaged or worn.

Order the TERX75/100 for removing damaged probe tubes without damaging the fixture.

A replacement -TIP can be ordered when your used tool is damaged or worn.

Use IPX75-4010 or IPX75-4040 to measure probe stroke in a test fixture (plunger remains at deflected position).

Our WW26, WW28 and WW30 high quality hand wire wrap tools that are available for 26, 28, or 30 AWG wire sizes. These tools form modified wraps on standard 0.025 [0.635] square or round posts up to 0.750 [19.05] long.

Additionally, WW26P, WW28P and WW30P can wrap pins up to 1.125 [28.58] long.

Our WU unwrap tools are double ended to facilitate easy removal of both clockwise and counterclockwise wraps and are compatible with both the standard and long pin versions.

TBR-1 is a made from an ESD anti-static natural bristle to easily clean away fluxes and debris from your test probe tips as part of your regularly scheduled maintenance program.

THM-1 Hammer is to be used in conjunction with our installation and extraction tools.

TRL-1 is a sturdy, compact canvas tool roll to organize a variety of maintenance tools to be accessible at your fintertips. (tools are sold separately)