X Probe Tools & Accessories

Used for simple Go/No-Go inspection of socket mounting holes in AT7000, G10/FR4 or similar materials. (Click here for a complete list of part numbers and to order)

The -FL tool is used to install a termination pin set FLUSH or 0.000.

A replacement -TIP can be ordered when your used tool is damaged or worn.

The SET X.XXX (must specify set height) tool is used to install termination pins to a specific set height (See applicable series for range). For negative set heights, use our -E SET X.XXX version tool.

A replacement -TIP can be ordered when your used tool is damaged or worn.

(Click here for a complete list of part numbers and to order)

Used to remove termination pins without damaging the mounting hole.

A replacement -TIP can be ordered when your used tool is damaged or worn.

To properly extract a termination pin from your fixture, we recommend that it first be mounted Flush. For your convenience, we offer an -KIT which includes of one extraction tool and one -FL insertion tool.

An E  extended tool is designed to remove and install termination pins from the back plate with the probe and optional spacer plate in place.

A replacement -TIP can be ordered when your used tool is damaged or worn.
(Click here for a complete list of part numbers and to order)

For ease probe installation while preventing probe tip blunting

Allows easy removal of probes with headed tip styles.

A replacement -TIP can be ordered when your used tool is damaged or worn.

Used to remove damaged probe tubes.

A replacement -TIP can be ordered when your used tool is damaged or worn.

Used to measure probe stroke in a test fixture (plunger remains at deflected position).
(Click here for a complete list of part numbers and to order)

Used to install Wire Grips for the wire assembly into the back of the socket.

A replacement -TIP can be ordered when your used tool is damaged or worn.

Used to install Wire Jacks into the back of the socket.

A replacement -TIP can be ordered when your used tool is damaged or worn.

WS tool has a selectable built-in adjustment dial to accommodate various wire sizes from 26-36 AWG. They are preset to strip a length of 0.120 [3.05] for use with wire plugs, jacks or grips.

WS-UNSET tool has a selectable built-in adjustment dial to accommodate various wire sizes from 26-36 AWG. The WS-UNSET tool has a movable gage that can produce a strip length up to 2 [50].

Our WW26, WW28 and WW30 high quality hand wire wrap tools that are available for 26, 28, or 30 AWG wire sizes. These tools form modified wraps on 0.025 [0.635] square or round posts.

Our WU unwrap tools are double ended to facilitate easy removal of both clockwise and counterclockwise wire wraps.

For insulating wire wrap and wire jack sockets and termination pins on 0.050 [1.27] centers and smaller.

Available in blue 24 [610] lengths with a 0.046 [1.17] ID, this tubing is stiffer than other types, making installation easier. Customer to cut tubing in lengths to suit application.

TBR-1 is a made from an ESD anti-static natural bristle to easily clean away fluxes and debris from your test probe tips as part of your regularly scheduled maintenance program.

The hammer is to be used in conjunction with our installation and extraction tools.